A. Ordinary pit card box: Select adhesive based on surface treatment, verify content information, shipment quantity, etc; First article confirmation: glue, box pasting effect, whether there is embossing or wrinkling, etc

B. Handmade boutique box: pre production preparation (mold fixtures, engineering order verification, material arrival status, glue selection, high and low temperature testing); First piece confirmation (glue, surface, font, whether there is glue peeling, tightness)

C. Fully inspect and ship according to packaging requirements

A. Preparation before machine operation (checking materials, CTP version content), ink preparation (four-color, spot color, etc.), whether the machine is working properly, etc

B. First article confirmation (for both versions and orders); Confirmation of content, correctness of paper, confirmation of printing corner lines, color confirmation, and verifier (captain, supervisor, quality control)

C. Process inspection: One sample of 1000 pieces should be retained, including color verification, content, paste, dirty spots, ink spots, etc

A. Prepare the corresponding adhesive film according to the production order number for lamination (gloss adhesive, matte adhesive, tactile film, semi gloss semi matte film); First article confirmation, comparison of color and brightness after gluing, inspection of adhesive film, adhesion, and corona discharge value; Process inspection, self check every 500 sheets, and test the corona value every time a roll of film is replaced

B. Oil (gloss oil, matte oil, scratch resistant UV, ordinary UV) shall be operated according to the order; First article confirmation, color verification, brightness testing, wear resistance testing; Process inspection, self check every 500 sheets, and test every replacement

C. Hot stamping, confirm the type and model of the gold material, and operate according to the order; First article confirmation, hot stamping layout content, gold material, adhesion testing; Process inspection, self check every 500 sheets to determine if there is any sticking or peeling of the board, and adhesion

D. Strike the convex (concave), confirm if the convex plate is complete, and check the convex plate; First article confirmation, including the content, location, and effect (depth) of the protrusion; Process inspection, whether there is displacement, whether there is missing or missing version, etc

A. Find the corresponding blade according to the production engineering order (size verification, blade line inspection)

B. First article confirmation: product size, box folding and forming (bursting knife, bursting line), hole position, etc., matching of version, order and data

C. Process inspection: manually inspect 200 sheets of beer once; Automatically self check 400 sheets of beer once. Check for broken wires, knife edges, burrs, rotten edges, etc